Ambulance 2 · streaming ECGExample
08Health
Management and telematics for ambulances and emergency fleets
Location, navigation, and status of emergency vehicles all on a single platform. After a collision or an SOS, a voice assistant calls the vehicle's designated contact.
Contact usMative Cloud for emergency response
Where are the vehicles, and what happens after a collision?
Mative connects ambulances and emergency vehicles to Mative Cloud TC. The Fleet Monitor module displays the vehicles' locations, assignments, and status on a map; the Emergency Center module contacts the vehicle's designated contact person following a collision or an SOS signal. Synapsis Smart CAN Bus and Synapsis DualCam transmit diagnostic data and video from the vehicle.
What it solves
The challenges facing emergency fleets
- 01
You don't know where the public transportation is
Fleet Monitor displays the location and status of each vehicle, ambulance assignments, and estimated arrival times at the emergency room on a map. Geofencing alerts you if a vehicle leaves the designated area or is used without authorization.
- 02
A crash or an unanswered SOS
After a collision, an SOS call, or movement while the engine is off, Emergency Center calls the vehicle's designated contact within seconds. If anyone is injured, it asks them to dial 112 immediately. Every call is recorded, transcribed, and summarized.
- 03
Driving under pressure: A guide
Mative records acceleration, sudden braking, speed, and driving paths, and creates a safety profile for each driver. You can use it for evaluations and targeted training based on how drivers actually drive.
- 04
Accidents to be documented
Synapsis DualCam records high-definition video of what's happening inside and outside the vehicle. You have the evidence you need for accident analysis, training, and legal protection, and you can retrieve the footage remotely.
- 05
Vehicles out of service when you need them most
Synapsis Smart CAN Bus reads fuel levels, engine temperature, and diagnostic data from the vehicle. Receive alerts when the thresholds you set are exceeded, and schedule maintenance based on actual usage. You can also identify unnecessary downtime by analyzing fuel consumption.
- 06
Data scattered across different systems
Diagnostic data, driver performance, trip history, and maintenance data are all consolidated into a single platform. Synapsis Analysis transforms this data into reports and analyses, allowing you to make dispatching decisions and assess response times based on actual numbers rather than memory.
Software
Software for emergency response fleets
Mative Cloud TC: Emergency Center Module
After a collision or an SOS alert, an AI-powered voice assistant calls the vehicle's designated contact; each call is recorded, transcribed, and summarized.
Mative Cloud TC: Fleet Monitor Module
Fleet map, ambulance assignments, and emergency room arrival times, with DTC diagnostics, video, and in-cab sensors in the widgets.
Synapsis Analysis
It combines data on vehicles, drivers, and assignments into analyses and reports to help you understand how you use your vehicles and where you're wasting time.
Field devices
Devices on board emergency vehicles
Request technical consulting
Synapsis Smart CAN Bus
It reads fuel level, engine temperature, and odometer data from the CAN bus and provides you with a complete diagnostic profile of the vehicle.
Synapsis DualCam
Based on Teltonika DualCam
AI-powered camera that records in high definition, with live streaming and remote data retrieval: the evidence needed after an accident.
Data sheet Synapsis DualCam
Synapsis VL110C
Based on JimiIoT VL110C
4G terminal with precise geofencing: keeps the vehicle connected even in challenging environments, where a constant connection and consistent uptime are essential.
Data sheet Synapsis VL110C
Synapsis FMB130
Based on Teltonika FMB130
Compact GPS tracker with basic sensor inputs: tracks the location and status of light vehicles and fleet support vehicles as well.
Data sheet Synapsis FMB130
Frequently asked questions
Questions about emergency and rescue fleets
Whom does Emergency Center call, and when?
It activates following a collision, an SOS, or a movement detected by the vehicle while the engine is off. An AI-powered voice assistant calls the vehicle's designated contact, explains what happened, and asks if everything is okay. If anyone is injured, it prompts the person to call 112.
Can I see the ambulance assignments?
Yes. The Fleet Monitor module displays ambulance dispatches on a map and calculates estimated arrival times at the emergency room. It integrates DTC diagnostics, video capture, and in-cab sensors into a single screen, and you can customize it with widgets to suit your workflows.
How do I check drivers' safety?
Mative analyzes acceleration, speed, sudden braking, and driving paths, and creates a safety profile for each operator to be used in evaluations and training. Synapsis DualCam records both internal and external events, which are useful for analysis and legal protection.
Industries
08Health
Connected medical devices, ambulances that transmit on the move, and homes that look after their residents: toward predictive, connected healthcare.
- Smart healthcare
- Emergency services
Contact us
Want to learn more? Contact us for more information or a demo of our products.
- Company
- Mative Srl
- VAT number: IT03190070643
- REA: AV-307398
- Offices
- Via San Pio da Pietrelcina, 81
- 83100 Avellino, Italy
- Contact
- TEL: +39 0825 1920080